Ash Pit & Details Kit for Enginehouse/Roundhouse Scale Model Masterpieces Sn2.5/Sn3 1:64
3" x 3-1/2" x 1/2"tall-LabStone Casting, timber risers, (3) ash barrels, boxes, metal support bar, & NBWs

Ash Pit & Details Kit for Enginehouse/Roundhouse Scale Model Masterpieces Sn2.5/Sn3 1:64

review
0
0
5
$13.89
In Stock.
Part Number:SMM7042
Scale Model Masterpieces (formerly Cal Freight)
Kit includes: 3" x 3-1/2" x 1/2"tall-LabStone Casting, timber risers, (3) ash barrels, boxes, metal support bar, & NBWs  

Instructions to Assemble & Weather this Kit  Seriously, this is NOT rocket  science-it's just some minor assembly and weathering! Measure & remove the track  ties that would be across the pit and then cut & glue (CA) the five (5) metal  support bars as shown and then cement the NBWs on the outside of the rails in  line with the support bars. Measure & cut to fit the two (2) timber risers and  cement in place below the track rails. Glue the track in place & check with a  track gauge.

Stain the Pit casting with Doctor Ben's Worn Concrete and apply two coats of Doctor Ben's Instant  Age Weathering Solution (#1152) diluted 50/50 with Isopropyl Alcohol (70%)  allowing the IA to dry between coats & then applied diluted Doctor Ben's  Realistic Rust Weathering Solution (#1150) down the steel bars, NBWs, & metal  parts. Sprinkle with coal & ash (not included) and you're done. Great Job!

Detail Parts are composed of UNFINISHED/UNASSEMBLED Resin, Wood, Plastic, and/or White Metal parts-Assembly & Finish Required. Assembly using most plastic cements and painting may be completed by hand or an air brush. Want to know how to weather your finished model? Scroll down to find out how! The above image and thumbnail at right best describes this item assembled (required) & its design. The above image/thumbnail  best describes this item SIZE, QUANTITY, COLOR, if assembled (required) & its design. Got Questions? Always Ask first!

Related Items