Rooftop Flat-Top Power Vent Kit (6 Labstone & plastic kits -5/16” diameter x 7/16” + pipe tall)
Assembly Instructions: 1) Cut 6 pieces of the provided 5/16" diameter tubing to length... 1/16" to 3/32" long if mounting flush on a flat roof or longer if mounted on a slanted roof or a 1/4" diameter hole is cut through the roof material to insert the tubing.
2) Place a drop of CA cement/glue on the bottom of the vent casting and holding the vent casting upside down place the tubing on the vent casting and set aside until the glue/cement is dry.
3) Stain the casting & base with Doctor Ben's Worn Concrete Weathering Stain and a wash of Doctor Ben's Realistic Rust and/or Weathering Ruse Weathering Solution and set aside to dry.
4) Glue the Rooftop Flat-Top Power Vents in place and step back to admire your work. Great Job!
These are the same vents included in our Scale Model Masterpieces 1950's Transition Era Pre-Fab Metal Station & Platform Kit #3131, Yard Office Kit #3132 & Track Scale Maintenance Shed Kit #3133
Detail Parts are composed of UNFINISHED/UNASSEMBLED Resin, Wood, Plastic, and/or White Metal parts-Assembly & Finish Required. Assembly using most plastic cements and painting may be completed by hand or an air brush. Want to know how to weather your finished model? Scroll down to find out how! The above image and thumbnail at right best describes this item assembled (required) & its design. The above image/thumbnail best describes this item SIZE, QUANTITY, COLOR, if assembled (required) & its design. Got Questions? Always Ask first!